HYDRAULIC DRILL WGH-5UP-EX

The drill is intended for manual rotary drilling of holes in hard rock and coal rock.

This drill can be used in underground mining operations classified as methane explosion hazard classes "a," "b," or "c," as well as coal dust explosion hazard classes A or B, and non-explosive environments.

TECHNICAL DATA

Technical Parameters		Hydraulic mining drill type WGH-5UP-Ex
Maximum Torque [Nm]		101
Maximum Power [kW]		4,51
Rotational Speed [rpm]		50 ÷ 830
Impact Frequency [bpm]		500 ÷ 8300
Rated Operating Pressure of the Working Fluid [MPa]		30
Working Fluid Flow Rate [l/min]		2,5 ÷ 41,5
Motor Intake [l/min]		25 at 500 rpm
Optimal Operating Temperature of the Working Fluid [°C]		20 ÷ 80
Type of Working Fluid		Mineral oil HLP 22-68 acc. To DIN 51524, Mineral oil HM 22 ÷ 68 acc. to ISO 6743/3, Wather-oil-Emulsion 0,3%
Washing Water Pressure [MPa]		0,4 - 0,6
Weight [Kg]		~ 11,9
Explosion Protection Designation		IM2c Non-electrical operating equipment in explosion-proof design of Group I, Category M2, protected by structural safety
Add. Conditions	Ambient temperature [°C]	- 20 ÷ +40
Add. Conditions	Filter accuracy [μm]	100
Maximum drilling diameter		Φ48mm

Parameter values may vary by up to ± 3%