Tokarska 6 Street, 40-859 Katowice | sekretariat@moj.com.pl
(32) 604 09 00
MOJ S.A.
Tokarska 6 Street, 40-859 Katowice
T: +48 (32) 604 09 00
F: +48 (32) 604 09 01
E: sekretariat@moj.com.pl
The pneumatic drill type WUP-22 is used for drilling holes in medium-hard and hard rocks using compressed air up to 0.6 MPa.
With this drill, you can remove chips from the borehole using water or compressed air. To enhance efficiency when drilling horizontal and inclined holes, the drill should be mounted on a pneumatic support P-62L. The drill is fully compatible with support due to a connector that allows the drill to be mounted on the support. The support is designed to stabilize the drill during operation and apply uniform pressure, reducing the effort required by the operator. We produce drills with 7/8" chisel holders - for a tool with 6ct. 7/8" chisel holder, and 1" chisel holders - for tools with 6ct. 1" chisel holder
For drilling, hand drill tooling should be used.
| Parameter | Unit | Value |
|---|---|---|
| Weight (without drill bit) | kg | ok. 22 |
| Impact frequency (at 0.4 MPa supply pressure) | min-1 | 1950 |
| Drilling speed (at 0.4 MPa supply pressure) | obr/min | 200 |
| Impact energy | J | 28 |
| Maximum compressed air supply pressure | MPa | 0,6 |
| Minimum compressed air supply pressure | MPa | 0,3 |
| Air consumption (at 0.4 MPa supply pressure) | m³/min | 3,2 |
| Dimensions of the 6-sided drill chuck | mm | 22,2 (⅞") x 108 or 25,4 (1") x 108 |
