Tokarska 6 Street, 40-859 Katowice | sekretariat@moj.com.pl
(32) 604 09 00
MOJ S.A.
Tokarska 6 Street, 40-859 Katowice
T: +48 (32) 604 09 00
F: +48 (32) 604 09 01
E: sekretariat@moj.com.pl
The SIK 1 pump unit is used for dosing liquid components of chemically curing adhesives with medium and high viscosity and density in the bonding process.
It allows for medium or high-pressure injection of liquid two-component components in constant proportions (1:1) of resin to catalyst, into rocks and coal seams in underground mining, and for filling cracks and voids in the mentioned areas.
It can be used in underground mines of methane explosion hazard levels a, b, or c and coal dust explosion hazard classes A or B.
| Parameters | Value |
|---|---|
| Pump Type | Piston-type submerged |
| Control Type | Manual switching of the distributor |
| Drive | Hydraulic |
| Driving Factor | Hydraulic oil, water-oil emulsion, or water |
| Requirement for a Driving Factor | min. 20 [dm3/min] |
| Minimum Supply Pressure | 7,5 [MPa] |
| Rated Pressure | 20 [MPa] |
| Maximum Supply Pressure | 32 [MPa] |
| Number of Cycles | 20 [cycles/min] |
| Refrigerant Amount Pumped per Cycle | 0,23 [dm3] + 0,23 [dm3] |
| Amount of refrigerant pumped per minute | 4,6 [dm3/min] + 4,6 [dm3/min] |
| Rated pressure of the conveying medium | 12 [MPa] |
| Maximum pressure of the conveying medium | 16 [MPa] |
| Pressure relief effectiveness | 17 [MPa]± 1,6 % |
| Proportion of compressed components | 1:1 |
| Performance ratio | 1:1,5 |
| Type of press parts | Two-component adhesives with low chemical aggressiveness of the components |
| Dimensions | 960 [mm] x 390 [mm] x 360 [mm] |
| Leveling (ground slope) | ± 15 [°] |
| Weight | circa 50 [Kg] |
